Samsung SCH-A950WRVXAR - Manual (Page 41)

Section 3: Call Functions 41
VoiceSignal
Sect
ion 3
Wait for the beep and repeat the digits using your normal
tone of voice.
8. After a moment, the phone plays back the recording and
prompts “Did the recording sound ok?” If the recording
was good, say “Yes.” If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then re-record.
Repeat this step until you’re satisfied with the recording.
9. After confirming that the recording sounds ok, repeat the
recording process with the next set of digits. After ten
sets of digits, the phone indicates that adaptation is
complete.
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to
its original state.
1. At the standby screen, press MENU. Use the right
navigation key to highlight SETTINGS & TOOLS.
2. Press Tools, then Voice Services.
3. Press Train Word, then Digit Dialing.
4. Highlight Reset Digits and press . The Reset
Digit Adaptation screen displays requesting conformation
of reset.
Note: If you have not performed the Adapt Digits function, the Reset Digits
option will not be accessible.
5. Press to proceed. Digit Adaptation Reset is
completed.