Samsung SPH-L900TSASPR - Manual (Page 219)

Camera and Video 205
 Flash: allows you to set the flash options to Off or On.
 Recording mode: allows you to set the recording mode to either Normal (limited
only by available space on the destination location), Limit for MMS (limited by MMS
size restrictions), Slow motion, or Fast motion.
 Effects: allows you to change the color tone or apply special effects to the photo.
Choose from: No effect, Cold vintage, Warm vintage, Posterize, Solarize, Green
point, Blue point, Red-yellow point, Washed out, Cartoonify, Black and white,
Sepia, or Negative.
 Exposure value: allows you to adjust the brightness level.
 Timer: allows you to set a timer for how long to wait before taking a video. Choose
from: Off, 2 sec, 5 sec, or 10 sec.
 Resolution: allows you to set the image size to one of the following: 1920x1080,
1280x720, 720x480, 640x480, or 320x240.
 White balance: allows you to adjust color casts in your video. Choose from: Auto,
Daylight, Cloudy, Incandescent, or Fluorescent.
 Outdoor visibility: allows you to maximize your videos taken while outdoors.
 Guidelines: allows you to turn the guidelines On or Off.
 Anti-Shake: reduces image blur due to the movement of the subject of the video or
hand movement.
 GPS tag: allows you to turn GPS On or Off (also known as Geotagging). The
location of where the video is taken is attached to the video.
 Contextual filename: allows you to have your location added as part of the
filename. You must first activate GPS tag described above.
 Save as flipped: when set to On, this option allows you to take and save a mirror-
image video.
 Video quality: allows you to set the level of detail in your video. Choose from:
Superfine, Fine, or Normal.
 Storage: allows you to configure the default storage location for images or videos as
either Phone or Memory card (if inserted).
 Reset: allows you to reset all camera or camcorder settings to the default values.