Samsung SM-G900AZKZAIO - Manual (Page 131)

Applications 123
4. Enter your current zip code and tap Done. This zip code
must correspond to the location of your desired TV and
set top box.
5. From the Find your TV service screen, select a service
provider from the available channel listing.
6. From the Personalize screen, you can either follow the
onscreen prompts to personalize your desired content
or tap Skip to continue without customizing your
content.
7. Read the onscreen Peel Disclaimer agreement and tap
Agree to complete the set up process.
Customizing Your Remote
1. From the top of the main screen, tap (Remote
Control) ➔ Continue.
2. From the Select your TV brand screen, tap your TV’s
manufacturer name.
• If you have a brand of TV not listed or you are using a projector,
select from one of the following two options. Choose from
either Show other brands or I have a home projector.
3. Aim your device at the TV and tap (Power) to
confirm the set up process completed successfully and
the correct TV IR codes were selected.
Note: The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
4. If the TV turned on, tap Yes, this code 1 works.
– or –
If the TV did not turn on after tapping (Power) and
waiting 10 seconds, tap No, test next code 2 or
Send this code 1 again.
5. From the Select your channel source screen, select the
entry that corresponds to your current channel control
method:
• Set-top Box: selected when changing channels is done via a
receiver box. Channels are not changed via the TV remote but
rather through the receiver/box.
• My xxx TV: selected when a signal is fed directly into the TV
and no box is used. Channels are changed directly on the TV by
using the TV remote and not a box’s remote.