Samsung DVD-V9700-XAA - Manual (Page 11)

ENG- 11
S E T U P
1 AUDIO OUT
Connect to the Audio input jacks of your television.
2 COMPONENT VIDEO OUT
- Use these jacks if you have a TV with
Component Video in jacks.
These jacks provide PR, PB and Y video.
- If Progressive Scan (P-SCAN) is selected by
pressing the P.SCAN button on the front panel,
progressive scan video mode will be enabled.
- If Interlace Scan (I-SCAN) is selected by
pressing the P.SCAN button on the front panel,
interlace scan video mode will be enabled.
3 . HDMI OUT JACK
- Use an HDMI cable to connect this jack to the
HDMI jack on your television for the best
quality picture.
- If an HDMI cable is connected to an HDMI-
compatible TV, HDMI will be output
automatically within 10 seconds.
- If you want to use the Video or Component
Output, unplug the HDMI cable.
4 DIGITAL AUDIO OUT (OPTICAL/COAXIAL)
- Use either an optical or coaxial digital audio
cable to connect to a compatible Dolby Digital
receiver.
- Use either an optical or coaxial digital audio
cable to connect to an A/V Amplifier that
contains a Dolby Digital, MPEG2 or DTS
decoder.
5 LINE IN 1 (VIDEO/AUDIO)
Connect to the V ideo/Audio output jack of your
external device.
6 LINE OUT (VIDEO/AUDIO)
Use a V ideo/Audio cable to connect to the
Video/Audio input jacks on your television.
You must have these jacks connected to see
video playback from the VCR on your TV.
Notes
■ Consult your
TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is
supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
Rear Panel
DVD/VCR Output Chart
COMPONENT VIDEO OUT
AUDIO OUT (L,R)
DIGITAL AUDIO OUT (OPTICAL, COAXIAL)
LINE OUT (A/V)
HDMI OUT
O
O
O
O
O
X
X
X
O
X
DVD Output Jacks VCR Output Jacks Type of Connection
▼
O : Active.
X : Inactive.
Œ Œ ´ ´ ˇ ˇ
¨ ¨ ˆ ˆ ¨ ¨ Ш Ш
01304D_V9700_XAA_Eng1 2/22/07 8:10 AM Page 11