AEG OVEN MCD_274 - Manual (Page 13)

13
UK
Electrical connections
·
WARNING! THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this safety measure not be
observed.
• If the plug that is fitted to your appliance is not suitable for your socket outlet,
it must be cut off and the appropriate plug fitted.
• Remove the fuse from the cut off plug. The cut off plug should then be
disposed of to prevent the hazard of shocks in case it should be plugged into a
13 Amp socket in another part of your home.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
GREEN AND YELLOW EARTH
BLUE NEUTRAL
BROWN LIVE
If you fit your own plug, the colours of the wires in the mains lead of your
appliance may not correspond with the markings identifying the terminals in your
plug, proceed as follows:
• Connect the green and yellow (earth) wire to the terminal in the plug which is
marked with the letter ”E” or the earth symbol (
) or coloured green and
yellow.
• Connect the blue
(neutral) wire to the
terminal in
the plug which is
marked with the letter
”N” or coloured black.
• Connect the brown
(live) wire to the
terminal in the plug
which is marked with
the letter ”L” or
coloured red.
1
GREEN & YELLOW
13 AMP FUSE
BROWN
CORD CLAMP
BLUE
P0329
13 AMP
GREEN & YELLOW
13 AMP FUSE
BLUE
CORD CLAMP
BROWN
MCD274,UK(2) 1/12/99 10:27 am Page 13