Samsung SPH-M560BLASPR - Manual (Page 121)

Ca
me
ra
2I. Camera 105
ⅷ Navigation Adjustments uses the navigation key to
select an option from Brightness , Self Timer , or Status
Display .
Ⅲ Status Bar to toggle the camera status information
either On (show) or Off (Hide). Press the
navigation key left (deactivate) or right (activate).
Ⅲ Brightness to adjust the image brightness level.
Press the navigation key left (decrease) or right
(increase) to select a setting. (The default setting
is
0 .)
Ⅲ Selftimer to activate the camera’s timer. (See
“Setting the Selftimer” on page 105.)
ⅷ Picture Album to review previously taken pictures.
Setting the Selftimer
1. From camera mode, press the navigation key
down.
2. Highlight the length of delay you want the timer to
use (
5 seconds or 10 seconds ) and press .
(The default setting is Off .)
3. Press when you are ready to start the timer.
(The timer is displayed at the bottom of the display
screen during the self-timer countdown.)
4. Get ready for the picture. (The phone will begin to
beep for each second of the countdown. When the
timer is down to three seconds, the outer LED will
go from blinking green to blinking red just before
the picture is taken.)
To cancel the selftimer after it has started:
ᮣ Press .
Taking Multiple Shots
This feature allows you to take a series of shots in a
continuous sequence.
To shoot a series of individual pictures:
1. From camera mode, press Options (right softkey) >
Shooting Mode > Series Shot .
Note While the selftimer is active, all keys are disabled
except
Back .
Note Once selected, resolution is changed to 320x240.
Sprint M560.book Page 105 Tuesday, March 2, 2010 3:37 PM