Net guard, Data connection status and indicators – Samsung SPH-M560BLASPR User Manual
Page 159
Web a
n
d
Dat
a
143
Net Guard
When you first connect to the Web, the Net Guard will
be displayed to confirm that you want to connect. This
feature helps you avoid accidental connections. You
can disable the Net Guard in the future by selecting
Always Auto-Connect
when the Net Guard is displayed.
To change your Net Guard settings:
ᮣ
Highlight
and press
>
Settings > More... >
Data > Net Guard
.
Ⅲ
Select
On
to activate the Net Guard.
Ⅲ
Select
Off
to deactivate the Net Guard.
Data Connection Status and Indicators
Your phone displays the current status of your data
connection through indicators at the top of the screen.
The following symbols are used:
Your data connection is active (data is being
transferred); the transmit/receive symbol will
blink to indicate data transmission. During data
usage, you can receive incoming voice calls or
SMS messages; outgoing voice calls can be
made, but the data services connection will
terminate.
Your data connection is dormant (no data is
being sent or received). Though not currently
active, when dormant the phone can restart an
active connection quickly; voice calls can be
made and received.
If no indicator is displayed, your phone does not have a
current data connection. To launch a connection, see
“Launching a Web Connection” on page 142.
Tip
To change the default launch page to the last page
you viewed, press
Menu
(right softkey)
> Mark this
page
and select the
Set this as my homepage
, select
Save
and press
OK
.
Note
When enabled, the Net Guard appears only once as
long as you have not turned the phone off and on.
Sprint M560.book Page 143 Tuesday, March 2, 2010 3:37 PM