Samsung SGH-I747MBAATT - Manual (Page 163)

Applications 155
Note: If the Touch to beam screen does not appear on the
source device:
- Pull them apart
- Verify the image is visible in the preview window on
the source device (providing the file)
- Place them together again
8. From the Touch to beam screen, tap the reduced image
preview to begin the transfer (2).
9. When prompted, separate the two devices. After a few
seconds (depending on file size) the recipient with then
see the transferred file displayed on their screen.
To share multiple pictures via S Beam:
1. On the source device (containing the desired image or
video), tap ➔ Gallery .
2. Locate the selected folder.
3. Touch and hold the first image and place a checkmark
on it and all desired images.
4. Place the two active NFC-enabled devices back to back
to begin.
5. From the Touch to beam screen, tap the reduced image
preview to begin the transfer.
6. When prompted, separate the two devices.
7. The picture(s) is transferred to the other device.
Editing a Photo
You can edit your photos using the built-in Photo editor
application on your device. The photo editor application
provides basic editing functions for pictures that you take on
your phone. Along with basic image tuning like brightness,
contrast, and color it also provides a wide variety of effects
used for editing the picture.
1. From the Apps menu, tap Gallery .
2. Select a folder location and tap a file to open it.
3. With the image displayed, press ➔ Edit to launch
the Photo editor.
Note: To select the picture area, touch and hold the current
picture.
4. Select an image area by touching and holding the
image and then selecting an available option: