Samsung CLP-415NW-XAA - Manual (Page 155)

Wireless network setup
156 2. Using a Network-Connected Machine
10 If your printer supports Wi-Fi Direct, the following screen appears.
Click Next.
• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager
(see "Setting up Wi-Fi Direct" on page 166).
• Wi-Fi Direct Name : The default Wi-Fi Direct Name is the model name
and the maximum length is 22 characters.
• Password setting is the numeric string, and the size is 8 ~ 64 characters.
11 When the wireless network set up is completed, disconnect the USB
cable between the computer and machine. Click Next.
12 Click Next when the Printers Found window appears.
13 Select the components to be installed. Click Next.
14 After selecting the components, you can also change the machine name,
set the machine to be shared on the network, set the machine as the
default machine, and change the port name of each machine. Click Next.
15 If you want to register your machine with the Samusng web site and
receive useful information, click On-line Registration. If not, click
Finish.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad-hoc wireless network by
following the simple steps below.
Items to prepare
• Network-connected computer
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
• USB cable