Samsung SCH-I400ZKOVZW - Manual (Page 122)

Settings 124
Configuring Mobile Hotspot Manually
Manual Mobile Hotspot configuration allows you to customize
settings for your hotspot.
1. From the Home screen, touch Menu ➔ Settings ➔
Wireless & networks ➔ Mobile hotspot settings.
2. Mobile Hotspot must be turned on for configuration. Touch
the check box to the right of Mobile Hotspot to turn on the
service.
3. Touch Configure.
4. At the prompt, touch Manual to continue. On the set-up
screen, configure these settings:
• Network name (SSID): The default name for your device is
displayed. Touch to enter a new name for your hotspot, if desired.
• Broadcast SSID: Touch to enable or disable broadcast of your
hotspot’s SSID for other devices to detect.
• Security: Choose a security level for your hotspot, from WEP, WPA
Personal, or WPA2 Personal, or None.
• Key (Passphrase): If you choose WEP, WPA Personal or WPA2
Personal security, enter a key to use when authenticating users.
• Broadcast Channel: Choose a channel to transmit your hotspot’s
signal.
5. Touch Done to complete set-up.
Tip: By default, your phone’s Mobile hotspot password is your phone number.
To change the password, touch Password, then enter a new password.
Configuring Mobile Hotspot Automatically
Automatic Mobile Hotspot configuration creates a default SSID
(network name) and Key for your hotspot.
1. From the Home screen, touch Menu ➔ Settings ➔
Wireless & networks ➔ Mobile hotspot settings.
2. Mobile Hotspot must be turned on for automatic
configuration. Touch the check box to the right of Mobile
Hotspot to turn on the service.
3. Touch Configure. At the prompt, touch Automatic to
continue.
Battery Management
1. From the Home screen, touch Menu ➔ Settings ➔
Wireless & networks ➔ Mobile hotspot settings.
2. Touch Battery Management.
3. At the prompt “Turn Mobile Hotspot off if there is no activity in”
choose a time period.