Samsung SECR410ZRAMTR - Manual (Page 28)

25
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold the key or the key.
“Say a Command” appears in the display and is pronounced through the
earpiece.
2. Say, “Call”.
You are prompted to “Say the name or number”.
3. Speak clearly and say the name of a person in your Contacts list, first
name followed by last name.
If the name is recognized, Voice Dial repeats the name and dials the
number.
If Voice Dial is not sure which name you said, it displays a choice list of up
to three names and prompts you with “Did you say?” followed by the first
name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next name, or use the
keypad to select the correct name from the list. (See “Choice Lists” on
page 91, for more information.)
• Press the Repeat (right) soft key ( or ) to say the name again.
• Press the Settings (left) soft key ( or ), then press the Exit right soft
key ( or ) to exit VoiceSignal without dialing.
If the recognized name has multiple numbers stored for it (that is, Mobile,
Work, Home, and so on), Voice Dial displays the possible choices and
prompts you with “Which number?”
5. Say one of the following number types:
• “Home”
• “Work”
• “Mobile 1”
• “Mobile 2”
Voice Dial dials the specified number.