Samsung SGH-A887ZKAATT - Manual (Page 137)

Tools 133
• Settings: lists the settings for voice command software such as:
Confirmation, Adaptation, Mode, Speakerphone, and About.
If the phone does not recognize your command the Command not
recognized screen displays with two options:
• Tutorial: provides instructions on how to use voice commands.
• Restart: touch and try the command options again.
Speak clearly when giving your command. There is no need for
you to speak slowly or with added emphasis. The voice
recognition software has been optimized to understand your
speech in its natural form. If it does not recognize your command
after a few seconds, a voice prompt asks you to repeat the
command. If it does not recognize your command again, the
following message displays “Sorry, no match found,” and voice
recognition turns off.
You must end your current Voice Commands call before you can
make another call using Voice Commands. To make a 3-way call,
only the first call can be made using Voice Commands.
Voice Recognition Tips
• Wait for the tone before you speak.
• Speak clearly and at a normal volume.
• There is no need to use paused speech. The voice recognition software
has been trained to recognize natural speech, and performs best when
you speak naturally.
• In very noise environments, it may be helpful to use a headset or a
Bluetooth headset.
Contacts List Voice Activation
On startup, Nuance Voice Recognition software reads your
Contacts list and voice-activates all the names.
When you add or change contacts, the software automatically
reloads and voice-activates the list when you add or modify a
contact.
Record Audio
Record Audio allows you to record voice memos. It also allows
you to send your audio clip to other people as an attachment of
an MMS message. Recording time will vary based on the
available memory within the phone.
1. Touch ➔ Tools ➔ Record Audio. For more
information, refer to “Record Audio Settings” on page 68.
2. To start recording, touch . Record a memo by
speaking into the microphone.
3. During the recording process you can either touch Stop
( ) to stop the recording or Pause ( ) to
temporarily halt the recording. Once the audio recording
has stopped, the message is automatically saved.
a887 Infinity.book Page 133 Wednesday, November 18, 2009 10:47 AM