Samsung LTP2045UX-XAA - Manual (Page 14)

English-9
4
Connect a coaxial
cable between the
ANTENNA OUT
terminal on the
cable box and the
B–IN terminal on the
A/B switch.
5
Connect another
cable between the
other OUT terminal
on the splitter and
the A–IN terminal on
the RF (A/B) switch.
6
Connect the last
coaxial cable
between the OUT
terminal on the RF
(A/B) switch and the
VHF/UHF terminal
on the rear of the
TV.
I
N S TA L L AT I O N
After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
1
Connect a PC video
cable(D-Sub) between
PC IN [PC] connector
on the TV and the PC
output connector on your
computer.
2
Connect a PC audio
cable between
PC IN [AUDIO] on the
TV and the Audio Out
of the sound card on
your computer.
Connecting a PC
BN68-00858B-00Eng 1.qxd 1/9/04 2:50 PM Page 9