Samsung LN32D405E5DXZA - Manual (Page 15)

15
MEDIA.P
P
POWER
P.SIZE
SLEEP S.MODE P.MODE
English
03
Basic Featur
es
Picture Options
O
MENU m → Picture → Picture Options →
ENTER E
Picture Options
Color Tone : Normal ►
Size : 16:9
Digital Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
U Move E Enter R Return
■ Color Tone (Cool / Normal / Warm1 / Warm2)
✎ Warm1 or Warm2 will be activated when the
picture mode is Movie.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
■ Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
✎ NOTE
x After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the
► button to select Position.
2. Press the ENTER E button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the ENTER E button.
5. Press the ► button to select Reset.
6. Press the ENTER E button to reset the picture
to its default position.
x HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source Picture Size
ATV, AV,
Component (480i, 480p) 16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p) 16:9, 4:3, Wide Fit,
Screen Fit
■ Digital Noise Filter (Off / Low / Medium / High /
Auto): If the broadcast signal received by your TV is
weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on
the screen.
✎ When the signal is weak, try other options until the
best picture is displayed.
■ HDMI Black Level (Low / Normal): Selects the black
level on the screen to adjust the screen depth.
✎
Available only in HDMI mode (RGB signals).
■ Film Mode (Off / Auto): Sets the TV to automatically
sense and process film signals from all sources and
adjusts the picture for optimum quality.
✎ Available in ATV, DTV(interlace), AV, COMPONENT
(480i / 1080i) and HDMI (1080i).
Picture Reset
(Reset Picture Mode / Cancel)
Resets your current picture mode to it's default settings.
■ Reset Picture Mode: Returns all picture values in the
currently selected mode to the default settings.
[LD403-ZA]BN68-03809A.indb 15 2011-06-22 �� 3:10:51