Samsung SGH-I907ZKAATT User Manual
Page 136
Bluetooth and Wi-Fi Services 111
1.
Make sure that the two devices are within range of one
another and that Bluetooth discoverable mode is enabled
on both devices.
2.
From the Today screen, press the Start key (
) to
activate the Start menu.
3.
Select Settings (
)
Connections tab
Bluetooth
(
)
Devices tab and select Add new device from the
on screen list. Your phone will then display a list of
discovered Bluetooth devices that were detected within its
communication range.
4.
Select the device you wish to pair with and press the Next
soft key.
5.
Enter a Passkey or PIN, which should be between 1 and 16
characters, and press the Next soft key. You are then
notified the pairing is in progress.
Note: If you are pairing your device with another wireless handset or with a
personal computer, you must enter the same Passkey on both devices.
6.
Press the Done soft key to complete the process.
Accepting a Bond
1.
Make sure that Bluetooth is turned on and the device is
discoverable.
2.
When prompted to bond with the another device, press the
Yes soft key.
3.
Enter the numeric passcode/passkey and press the Next
soft key. You are then notified the pairing is in progress.
4.
Press the Done soft key to complete the process.
Renaming a Bond
The name of each bond can be changed, if necessary, by
following these steps:
1.
Make sure that the two devices are within range and that
Bluetooth is discoverable on both devices.
2.
From the Today screen, press the Start key (
) to
activate the Start menu.
3.
Select Settings (
)
Connections tab
Bluetooth
(
)
Devices tab.
4.
Select the bond you want to rename.
5.
In the Display Name field, enter a new name for the bond.