APC AR8184 - Manual (Page 4)

Data Cable Partitions—Installation 4
Bonding Data Cable Partitions and ladders
To bond NetShelter Data Cable Partitions to one another:
1. Attach one end of an 8-in ground wire  to a ground stud on the partition and secure the ground
wire with two M6 washers  and an M6 nut  as shown.
2. Connect the free ends of the ground wires to the ground stud on the partition adjacent to the first
partition, and secure the grounding wires with two M6 washers  and an M6 nut  .
Grounding ladders
See “How to Ground the Ladder” in the Cable Ladder Installation with Troughs and Partitions
Sheet, included with each Cable Ladder, for grounding instructions.
NetShelter NetShelter NetShelter
ns
047
5c