Preparation, Connecting a power source, Battery pack installation / ejection – Samsung SMX-F33BN-XAA User Manual

Page 24

Advertising
background image

English_14

CONNECTING A POWER SOURCE

There are two types of power source that can be connected to your memory camcorder.
Do not use provided power supply units with other equipment.
- The battery pack: used for outdoor recording.
- The AC power adaptor : used for indoor recording and playing back.

➥page 21

Battery Pack installation / ejection

It is recommended you purchase one or more additional battery packs to allow
continuous use of your memory camcorder.

Inserting the battery pack

1. Slide and open the battery slot cover as shown in the fi gure.
2. Insert the battery pack into the battery slot until it softly clicks.

Make sure that the SAMSUNG logo is facing up while the set is placed as
shown in the fi gure.

3. Slide and close the battery slot cover.

Ejecting the battery pack

1. Slide and open the battery slot cover and push the battery lock.

Gently push the battery lock in the direction as shown in the fi gure to eject
the battery out.

2. Pull the ejected battery out in the direction as shown in the fi gure.
3. Slide and close the battery slot cover.


preparation

Store the battery pack separated from the memory camcorder while
not in use.
It is recommended to prepare an additional battery pack for prolonged
outdoor use.
Contact your nearest Samsung Electronics Service Center for purchasing
additional battery pack.

[BATT. RELEASE]
Switch

CARD

CARD

CARD

Insert

Eject

Advertising
This manual is related to the following products: