Samsung SCH-U440HAAUSC - Manual (Page 27)

Call Functions 24
Two-Touch Dialing
Memory locations 10 through 99 are special Two-Touch dialing
locations.
Example: For location number 13, briefly press , then press and hold
until the name and number appear in the display and the number is
dialed.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example: For location number 113, briefly press , briefly press again,
then press and hold until the name and number appear in the
display and the number is dialed.
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (two-second) P pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Making a Call — Quick Search Dialing
While in standby mode, you can use the Quick Search feature to
find and dial any of your Contacts entries by entering the first few
letters of a Contact name. (For more information, refer to “Quick
Search” on page 123.)
Quick Search Dialing a Contact
To find and dial a Contact, do the following:
1. In standby mode, enter
the first few letters of
the Contact name, as
shown. (For more
information, refer to
“Entering Text” on
page 15.)
2. Press the Up navigation
key. The Contacts Find
screen appears
showing the desired
Contact name, as
shown.