Samsung SCH-U440HAAUSC - Manual (Page 29)

Call Functions 26
• Press the Settings soft key, then press the Exit soft key to exit
Voice Dial without dialing.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
5. Say one of the following number types:
• “Home”
• “Work”
• “Mobile”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold .
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 5 5 5 6 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list. (For more information, refer to “Choice Lists” on
page 96.)
• To say the name again, press the Repeat soft key.
• To exit Voice Dial without dialing, press
.
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains 2-Sec (P) pause(s) simply wait
for the pauses to pass and the dialing to complete.
• If you voice dial a contact that contains Wait (W) pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
• A ringtone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including: Ringer Off, Vibrate , Low , Low/