Samsung SGH-C417ZDACIN - Manual (Page 23)

Section 3: Call Functions 23
Quiet Mode
Quiet mode is convenient when you wish to stop the phone from making noise, in a
theater for example.
In Idle mode, press and hold the key until the “Vibration All Activated” message
and the Quiet Mode icon displays.
In Quiet mode, your phone will vibrate and light up the external LCD display or just
light the external LCD display depending on the setting in the Silent All feature.
To exit and reactivate the previous sound settings, press and hold the key again
until “Vibration All Deactivated” displays. The Quiet Mode icon no longer
displays.
Note: Setting for Quiet Mode can be set to Silent All.
Options During a Call
Your phone provides a number of control functions that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make
another call while you have a call in progress if your network supports this service.
To put a call on hold:
1. While on a call, press the left soft key Options. Highlight Hold and press
the Select soft key. The call is on hold.
2. You can reactivate the call whenever you want, by pressing the Resume
soft key.
To make a call while you have a call in progress:
1. Place the call on hold using the previous procedures, and enter the phone
number that you wish to dial or look it up in the Address Book.
2. Press the key to dial the second call.
When you have an active call and a call on hold, you may switch between the two
calls, changing the one on hold to active and placing the other on hold. To switch
between the two calls, simply press the Swap soft key. The current call is placed on
hold and the call on hold is reactivated so that you can continue conversing with that
person.