Macintosh – Samsung SCX-5835FN-XAR User Manual
Page 27
Getting started_ 4
4.
Select Typical installation for a local printer. and then click Next.
If your machine is not already connected to the computer, the
following window will appear.
•
After connecting the machine, click Next.
•
If you don’t want to connect the machine at this time, click Next,
and No on the following screen. The installation will then start
and a test page will not be printed at the end of the installation.
•
The installation window that appears in this User’s Guide may
differ depending on the machine and interface in use.
5.
After the installation is finished, a window asking you to print a test page
appears. If you choose to print a test page, select the checkbox and click
Next
. Otherwise, just click Next and skip.
6.
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
7.
To register as a user of the machine in order to receive information from
Samsung, select the checkbox and click Finish. You are now registered
to the Samsung web site.
Otherwise, just click Finish.
If the printer driver does not work properly, uninstall the driver and
reinstall it.
For windows follow the steps below to uninstall the driver.
a)
Make sure that the machine is connected to your computer and
powered on.
b)
From the Start menu, select Programs or All Programs > your
printer driver name > Maintenance.
c)
Select Remove and click Next.
You will see a component list so that you can remove any item
individually.
d)
Select the components you want to remove and then click Next.
e)
When your computer asks you to confirm your selection, click Yes.
The selected driver and all of its components are removed from
your computer.
f)
After the software is removed, click Finish.
Macintosh
The software CD that came with your machine provides you with the PPD
file that allows you to use the CUPS driver or Apple LaserWriter driver (only
available when you use a machine which supports the PostScript driver) for
printing on a Macintosh computer.
Also, it provides you with the TWAIN driver for scanning on a Macintosh
computer.
1.
Make sure that the machine is connected to your computer and powered
on.
2.
Insert the supplied software CD into your CD-ROM drive.
3.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
4.
Double-click the MAC_Installer folder.
5.
Double-click the Installer icon.
6.
Enter the password and click OK.
7.
The Samsung Installer window opens. Click Continue.
8.
Select Easy Install and click Install. Easy Install is recommended for
most users. All components necessary for machine operations will be
installed.
If you select Custom Install, you can choose individual components to
install.
9.
When the message which warns that all applications will close on your
computer appears, click Continue.
10.
After the installation is finished, click Quit.
If you have installed scan driver, click Restart.
11.
Open the Applications folder > Utilities > Print Setup Utility.
•
For Mac OS X 10.5~10.6, open the Applications folder > System
Preferences
and click Print & Fax.
12.
Click Add on the Printer List.
•
For Mac OS X 10.5~10.6, click the “+” icon; a display window will pop
up.
13.
For Mac OS X 10.3, select the USB tab.
•
For Mac OS X10.4, click Default Browser and find the USB
connection.
•
For Mac OS X 10.5~10.6, click Default and find the USB connection.
14.
For Mac OS X 10.3, if Auto Select does not work properly, select
Samsung
in Printer Model and your machine name in Model Name.
•
For Mac OS X 10.4, if Auto Select does not work properly, select
Samsung
in Print Using and your machine name in Model.
•
For Mac OS X 10.5~10.6, if Auto Select does not work properly, select
Select a driver to use...
and your machine name in Print Using.
Your machine appears on the Printer List, and is set as the default
machine.
15.
Click Add.
If the printer driver does not work properly, uninstall the driver and
reinstall it.
Follow steps below to uninstall the driver for Macintosh.