Activating your phone – Samsung SCH-R460NBAXAR User Manual

Page 9

Advertising
background image

Getting Started 6

2.

Insert the smaller end of

the Travel Adapter into the

charger/accessory

connector on the lower

left side of your phone.

Warning!: Your touch screen responds best to a light touch from the pad of

your finger or a non-metallic stylus. Using excessive force or a
metallic object when pressing on the touch screen may damage
the tempered glass surface and void the warranty. See “Warranty
Information”
on page 134.

Important!: You must unplug the adapter before removing the battery from

the phone during charging to avoid damage.

Low Battery Indicator

The battery indicator (

) in the upper-right corner of the

display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.

Five bars (

) indicate a full charge.

An empty battery icon (

) indicates a near empty battery.

A blinking empty battery icon (

) and a tone sounding indicate you

have two to three minutes before the battery is too low to operate the
phone.

If you continue to use your phone without charging its battery, the
phone will shut down.

Activating Your Phone

Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.

Turn Your Phone On

1.

Open the flip on your phone,

as shown.

2.

Press .

Note: As with any other radio-transmitting

device, do not touch the antenna
while using your phone as this can
affect call quality and can cause the
phone to operate at a higher power
level than is necessary.

3.

The phone begins searching

for a network signal.

4.

Once the phone finds a signal,

the time, date, and day appear in the second line of the

display.

5.

You’re now ready to place and receive calls.

Correct

Incorrect

Press

r460.book Page 6 Thursday, July 2, 2009 10:37 AM

Advertising