Samsung SPH-M810HAASPR User Manual
Page 108
96
Transfer Contacts with Bluetooth
The process of transferring data via Bluetooth is also
known as “beaming” and might be referred to that way
within other literature.
To set up your old phone and the Instinct s30 to transfer
contacts:
1.
Turn on your old phone and then activate the
Instinct s30.
2.
Activate Bluetooth functionality on your old phone
and set visibility to
Always Visible
.
3.
Activate Bluetooth on your new device by pressing
and then touching
Main
(
)
>
Settings >
Bluetooth
.
4.
Touch and drag the Bluetooth slider to the
On
position. (The page then refreshes to reveal new
functionality and options.)
5.
Touch
Visibility
and set your Bluetooth visibility to
Always Visible
.
To pair the two devices and send contacts to your Instinct
s30:
1.
On your device, press
and touch
Main
(
)
>
Settings > Bluetooth > Trusted Devices.
Ⅲ
If you have previously addeded devices, touch
in the upper-left corner to search for the
old device.
2.
Select the previous phone by touching its name.
3.
Enter PIN of ‘0000’ and touch
Done
.
4.
On your old device, go to the Bluetooth function
that allows you to send all of your contacts to the
trusted device. (Consult your
User Guide
for your
device for instructions.)
5.
Select a contact and begin the transmit process.
6.
On the Instinct s30, touch
Yes
to accept the
incoming contact information.
M800Mini.book Page 96 Thursday, September 17, 2009 1:36 PM