Samsung DVD-R160-XAA - Manual (Page 27)

S
ystem Setup
English - 27
Setting Up the System Options
Set Top Box Control
If you have your cable box/satellite receiver(set top box) connected
as shown on page 15, the box can be controlled after setting up this
menu.
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
Menu items differ depending on the disc type.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
System menu will be displayed.
4. Select Set Top Box Control using the ▲▼ buttons, then press the
ENTER or ► button.
Set Top Box Control menu will be displayed.
5. Select the desired sub menu (Control, Connection, CH Digit Lock,
Mode for SET button, and Brand Code) using the ▲▼ buttons, then
press the ENTER or ► button.
Control
Select the sub item(Off or On) using the ▲▼ buttons, then press the
ENTER button.
• Off : Turns off the cable box or satellite receiver (set top box) control
function. Select this if you do not want to use the supplied set top box
controller (IR Blaster).
• On : Turns on the cable box or satellite receiver (set top box) control
function.
Connection
Select the sub item (AV1, AV2 or S-Video) using the ▲▼ buttons, then
press the ENTER button.
If you connect your cable box or satellite receiver to the recorder's audio/
video input. (page15)
• AV1 : Select this when the cable box or satellite receiver is connected to
the DVD recorder's AV 1 IN jacks.
You can watch the output of the cable box or satellite receiver connected
to AV1 when the Recorder is powered off.
• AV2 : Select this when the cable box or satellite receiver is connected to
the DVD recorder's AV 2 IN jacks.
• S-Video : Select this when the cable box or satellite receiver is connected
to the DVD recorder's S-Video IN jack.
You can't select AV1 when the cable box or satellite receiver is connected
to the S-Video input.
See the instruction supplied with your cable box to confi rm the
cable box's antenna output channel.
The DVD-R160 does not have a TV tuner.
Recording TV broadcasts is possible via Connection to Cable/
Satellite boxes and Multi Channel Video Services.
▌
■
■
System DVD-Recorder
No Disc
Timer Rec.
Setup
Set Top Box Control ►
CM Skip Time : 15 Sec ►
EP Mode Time : 6 Hours ►
Chapter Creator : Off ►
Quick Recording : Off ►
Anynet+(HDMI-CEC) : On ►
MOVE ENTER RETURN EXIT
Set Top Box Control DVD-Recorder
No Disc
Timer Rec.
Setup
Control : Off ►
Connection : AV1 ►
CH Digit Lock : Off ►
Mode for SET button : Off ►
Brand Code : 0000 ►
MOVE ENTER RETURN EXIT
Off
On
Set Top Box Control DVD-Recorder
No Disc
Timer Rec.
Setup
Control : Off ►
Connection : AV1 ►
CH Digit Lock : Off ►
Mode for SET button : Off ►
Brand Code : 0000 ►
AV1
AV2
MOVE ENTER RETURN EXIT
Set Top Box Control DVD-Recorder
No Disc
Timer Rec.
Setup
Control : Off ►
Connection : AV1 ►
CH Digit Lock : Off ►
Mode for SET button : Off ►
Brand Code : 0000 ►
S-Video
AV2
MOVE ENTER RETURN EXIT
01318A-R160-XAA-ENG.indb 27 01318A-R160-XAA-ENG.indb 27 2007-05-02 오전 9:07:51 2007-05-02 오전 9:07:51