Samsung LN32D405E3DXZA - Manual (Page 17)

17
English
03
Basic Featur
es
Setup Menu
¦ Setting the Time
O
MEnU m → Setup → Time → EnTER E
Time
✎
The current time will appear every time you press the
InFO button.
■ Clock: Setting the clock is for using various timer
features of the TV.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
– Auto: Set the current time automatically using the
time from the digital channel.
✎ The antenna must be connected in order to set
the time automatically.
– Manual: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, hour, Minute
and am/pm.
✎ Available only when Clock Mode is set to
Manual.
✎
You can set the Month, Day, Year, hour and
Minute directly by pressing the number buttons
on the remote control.
Time Zone: Select your time zone.
✎ This function is only available when the Clock
Mode is set to Auto.
DST (Daylight Saving Time) (Off / On / Auto):
Switches the Daylight Saving Time function on or off.
✎
This function is only available when the Clock
Mode is set to Auto.
¦ Using the Sleep Timer
O
MEnU m → Setup → Time → Sleep Timer →
EnTER E
■ Sleep Timer t : Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎ To cancel the Sleep Timer, select Off.
¦ Setting the On/Off Timer
O
MEnU m → Setup → Time → Timer 1 →
EnTER E
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Timer 1
L Move U Adjust E Enter R Return
On Time
Off Time
Volume Contents
Repeat
▲
▼
Sun Mon Tue Wed Thu Fri Sat
12 00 am Inactivate
12 00 am Inactivate
10 TV Air 3
Once
On Time / Off Time: Set the hour, minute, am/pm
and activate / inactivate. (To activate the timer with the
setting you have chosen, set to Activate.)
Volume: Set the desired volume level.
Contents: When the On Time is activated, you can turn
on a specific channel or play back contents such as
photo or audio files.
– TV/USB: Select TV or USB. (Make sure that an USB
device is connected to your TV.)
– Antenna: Show selected antenna.
– Channel: Select the desired channel.
– Music: Select the folder containing MP3 files on the
USB device.
– Photo: Select the folder containing JPEG files on the
USB device.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
✎ The c mark indicates the day is selected.
✎
Auto Power Off (available only when the TV is turned
on by the Timer): The TV will be automatically turned off
after 3 hours of being left idle to prevent overheating.
[UD5003-ZA]BN68-03777A-ENG.indb 17 2011-05-06 �� 11:04:09