Samsung RF263TEAESP-AA - Manual (Page 11)

11_ setting up
Disconnect two connectors ( 2. 2 ) on the left side
door. To remove the water coupler from the
hinge, twist and pull it from the hinge. Remove
the water line (
3 ) while pressing the marked
part ( 4 ) of the water line coupler.
If a red clip is on the coupler, it must be
removed before removing the tube.
Pull and remove the hinge lever ( 3. 5 ) . Remove
the ground screw ( 6 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
(
7 ).
Lift the door straight up to remove. 4.
Remove the screw ( 5. 8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
(
9 ) attached to the lower left and right door
hinges with an allen wrench (3/16”). Remove
the lower left and right door hinges (
10 ).
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts in
reverse order.
The Water Line must be fully Inserted to the 1.
center of transparent coupler to prevent water
leakage from the dispenser.
Insert
2. the clip in the top plate and check that it
By placing the 3 screws again ensure that the wires
are in not to damage the harness.
DISASSEMBLE THE FLEX DOOR
Take out the upper drawer by lifting it up. 1.
Take out the lower basket ( 2. 1 ) by lifting the
basket up from the rail system.
Press the fixing hook of rail system. 3.
CAUTION
CAUTION
2
3
4
Red Clip
(1/4")
5
6
7
Allen wrench
10
8
9
1
DA68-02601A(EN+FR+ES)-0.2.indb 8 2012.3.31 9:49:38 AM
01 SETTING
UP