Samsung SCH-N330PWVXAR - Manual (Page 50)

42
•
P pause : A hard pause stops the calling sequence until
you enter additional numbers.
•
T pause : A two-second pause stops the calling sequence
and then automatically sends the remaining digits.
You can enter multiple two-second pauses to extend the
length of a pause. For example, two consecutive two-second
pauses cause a total pause time of four seconds. Keep in
mind pauses count as digits towards the 32-digit maximum.
To store a pause in a contact, follow these steps:
1. In standby mode, enter the number you want to save as
a contact (such as your bank’s teleservice number).
2. Press the left soft key ( ) Option . The following pause
menu options appear in the display.
P pause
T pause
P pause is a hard pause (awaits input from you) and a
T pause is a two-second pause.
3. Use the navigation key to highlight the pause option of
your choice.
4. Press to enter the highlighted pause into your
number sequence.
5. When you’re finished entering the number and pauses,
press the right soft key ( ) Save to store the number in
your Contacts.