Samsung SGH-A847ZAAATT User Manual

Page 148

Advertising
background image

143

Note: All Network Profiles are pre-configured and cannot be altered on this

screen. Your phone is set up by default for connecting to the network.
If you change the settings without first checking with your service
provider, the web browser, MMS, and e-mail features may not work
properly.

3.

Select the parameter you want to edit:

• Set Name: enter a profile name.

• Access Name: edit the access point name.

• Auth Type: select the type of authentication used for this WAP

connection: None, Normal, or Secure.

• User ID: enter the User ID required to connect to the network.

• Password: enter the user password required to connect to

the network.

• Protocol: set the connection protocol used by the WAP browser:

WAP, HTTP, or Other.

• Home URL: enter the URL address of the page to use as

your homepage.

• Gateway Address: Enter the Gateway Address. This option only

appears when the Protocol is set to WAP.

• Secure Connection: Select On or Off depending on whether or not

you have a secure connection. This option only appears when the
Protocol is set to WAP.

• Proxy Address: MEdia Net set as the proxy server address

and port.

• Linger Time (sec.): set a time period (in seconds) after which the

network is disconnected if there is no new data traffic.

• Advanced Settings: allows you to configure some of the

IP-specific information: Static IP, Static DNS, Server information,
and Traffic Class. Highlight this option and press the Edit soft key to
access the following options:

Static IP: specify if you want to manually enter an IP address. Remove
the check mark if you want the server to automatically assign the IP
address.

Local Phone IP: allows you to configure the local phone IP address.

Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. Remove the check mark if you want the server to
automatically assign the address.

Server 1/Server 2: enter the Domain Name Server (DNS) addresses.

Traffic Class: select the traffic class, press the Edit soft key, select a
Traffic Class (Subscribed, Conversation, Streaming, Interactive, or
Background) and press the OK soft key.

Note: The WAP settings may vary depending on the service provider.

IMS Settings

IMS is the method used to connect to the server and set up the
Video Share option.

Service

: allows you to set the IMS service to On or Off. The default

setting is On. If you set the IMS Service to Off, you are unable to use
the Video Share option.

A847.book Page 143 Thursday, April 29, 2010 5:26 PM

Advertising