Samsung LNS4696DX-XAA - Manual (Page 53)

English-51
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”.
1 Press the MENU button. Press the or button to select “Setup”,
then press the ENTER button.
2 Press the or button to select “Blue Screen”, then press the
ENTER button.
3 Press the or button to select “On” or “Off”, then press the
ENTER button.
Select “Return” by pressing the or button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
Freezing the Picture
Press the STILL button to freeze a moving picture. (Normal sound will still be heard.)
To cancel this function, press the STILL button again or press any button on the remote control.
BN68-01047F-00Eng.qxd 7/14/06 5:18 AM Page 51