Samsung SGH-T989AABTMB - Manual (Page 212)

207
Note: The Phone vibrate setting is independent of other call sounds settings.
For example, if you have Silent mode enabled along with Phone
vibrate, your phone won’t play a ringtone, but will vibrate for an
incoming call.
Note: Use both the Silent mode and enable the Only when not in silent mode
option to guarantee no vibrations or sounds from your phone.
Adjusting the Volume Settings
The Volume menu now provides access to various volume
settings within one on-screen popup menu.
1. Press ➔ and then tap (Settings) ➔ Sound
➔ Volume.
2. Touch and drag the on-screen slider to assign the volume
settings for any of the following volume levels.
• Incoming call, Media, System, or Notification.
3. Tap OK to assign the volume levels.
Setup the Voice Call Ringtone
1. Press ➔ and then tap (Settings) ➔
Sound.
2. Tap Phone ringtone.
3. Tap a ringtone from the available list. The ringtone briefly
plays when selected.
4. Tap OK to assign a ringer.
Setting a Notification Ringtone
1. Press ➔ and then tap (Settings) ➔ Sound
➔ Notification ringtone.
2. Tap one of the ringtones and tap OK.
Audible Tone Settings
The Audible touch tones and Audible selection options are used
when you use the dialing pad or making a screen selection. Each
time you press a key or make a selection the selected tone
sounds.
1. Press ➔ and then tap (Settings) ➔
Sound.
2. Tap Audible touch tones or Audible selection. A check mark
displayed next to these features indicates active status.