Samsung SGH-T989AABTMB - Manual (Page 202)

197
Activating the Device Name
1. Press ➔ and then tap (Settings) ➔
Wireless and network ➔ Bluetooth settings ➔ Device name.
The assigned device name displays.
2. Press to erase the current device name and enter a
new name for this device using the keyboard.
3. Tap OK to confirm your setting.
Activating Visibility
ᮣ Press ➔ and then tap (Settings) ➔
Wireless and network ➔ Bluetooth settings ➔ Visible.
The phone is now activated for discovery other devices for
a period of time determined by the value set within the
Visible time-out menu.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1. Press ➔ and then tap (Settings) ➔
Wireless and network ➔ Bluetooth settings ➔
Scan for devices. Your phone begins scanning and lists any
discovered devices in the Bluetooth devices section.
2. Tap a device name to pair with the device.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required, and
tap OK.
USB Utilities
1. Press ➔ and then tap (Settings) ➔ USB
utilities ➔ Connect storage to PC.
2. If prompted, tap OK to turn USB debugging mode off.
3. Plug in a compatible USB cable to begin using the device
for mass storage mode.