Samsung NP680Z5E-X01US - Manual (Page 98)

96 97
Chapter 4.
Settings and Upgrade
Upgrading Memory
(Optional)
3
Remove the screw on the memory compartment cover at the
bottom of the computer using a screw driver.
Fixing Screw
Memory
Compartment Cover
4
Insert a new memory module into the memory slot at an
angle of approximately 30 degrees aligning it to the angle of
the memory slot.
Memory Slot
If there is a protective memory cover
Loosen the fixing screw to remove the protective cover and
insert the memory module.
Protective Memory Cover
5
Push the memory module down so that it is completely fixed.
If the memory does not fit easily, push the memory module
down while pulling the memory module latches outward.
Memory Module Latches