Jawbone 2 - Manual

Quick Start Guide
1 Power Up
• PLUG IN JAWBONE FOR 50 MINUTES (YES, THERE’S AN AC ADAPTER IN THE BOX)
2 Pair
• PHONE BLUETOOTH® SETTING: ON
• JAWBONE AUTOMATICALLY GOES INTO PAIRING MODE FIRST TIME ON
• ALL OTHER TIMES: HOLD JAWBONE TALK AND NOISEASSASSIN™ BUTTONS: 2 SECONDS
• INDICATOR LIGHT FLASHES RED + WHITE
• PHONE: ‘SEARCH FOR NEW DEVICES’
• SELECT JAWBONE, ENTER PASSCODE ‘0000’
3 Share
• MAKE THAT CALL (GO CHANGE THE WORLD, WE KNOW YOU CAN)
Jawbone Overview
a NoiseAssassin Button
b
Talk Button
note
Both Talk Button
and NoiseAssassin
Button are hidden
beneath the external
face of the headset. To
activate either button,
simply press on the
areas indicated above.
1 Charging
• You can charge your Jawbone headset via
the wall charger, or via USB on your computer.
• Place the Jawbone headset in the socket
with the jawbone logo facing upward.
• Charge the battery fully on first use.
• Charge time 50 minutes.
• 80% charge after 35 minutes.
• Indicator light is RED
while headset is charging / WHITE when headset
is fully charged.
• Indicator light flashes RED when battery is low.
(continue to page 2)
c
Voice Activity Sensor
d
Earbud
e
Earloop
The medium sized earloop and
earbud are already fitted to
your Jawbone at the factory.