Samsung SPL4225DX-XAC - Manual (Page 31)

31
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1 Press the Menu button. Move the joystick up or
down to select “PIP”, then press the joystick to
enter.
2 Move the joystick up or down to select “Source”,
then move the joystick left or right to enter.
3 Move the joystick up or down to select an external
signal, then move the joystick left or right.
4 Press the Menu button to exit.
PIP
Select On
Locate
Source
Move Adjust Exit
PIP
Select On
Locate
Source
Move Adjust Exit
PIP
VIDEO
S-VIDEO
Move Exit
Quick way to access the PIP source: Just press
“Source” in the cover on the remote control. !
BN68-00262A-01Eng_20-43 12/17/04 11:40 AM Page 31