Samsung SGH-T989ZKBTMB - Manual (Page 249)

Wi-Fi Calling Settings
Important! An updated SIM card must be installed within the
device prior to using this feature. Wi-Fi must first
be active and communicating prior to launching
Wi-Fi Calling.
1. From the main Settings page, tap More settings ➔
Wi-Fi Calling.
2. Tap Connection Preferences and select a preference for
use of the Wi-Fi Calling feature:
• Wi-Fi Preferred: Wi-Fi network is preferred over cellular
network when making calls. Calling requires you to stay in the
Wi-Fi range.
• Cellular Network Preferred: The cellular network is preferred
over a Wi-Fi network when making calls.
• Never use Cellular Network: Use only Wi-Fi for calls. Do not
use Cellular Network, even if available.
3. Tap OK to save the setting.
4. Tap Help from the main Wi-Fi Calling Settings page to
navigate through either an on-screen tutorial or review
the top 10 Wi-Fi Calling questions.
Near Field Communication
This feature is used to read and exchange tags. When used
in conjunction with Android Beam, your device can be used
to beam application content when NFC-capable devices are
touched.
1. From the main Settings page, tap More settings.
2. Tap the NFC field. A check mark displayed next to the
feature indicating it is enabled.
3. Enabling NFC also enables Android Beam and S Beam.
Changing Your Settings 244