Samsung SGH-T989ZKBTMB - Manual (Page 233)

To disconnect tethering:
1. From the Home screen, tap (Apps) ➔
(Mobile HotSpot).
– or –
From the main Settings page, tap More settings ➔
Tethering and Mobile HotSpot.
2. Tap USB tethering from the Tethering menu to remove
the check mark and deactivate the feature.
3. Remove the USB cable from the device.
Mobile HotSpot
This feature allows you to turn your device into a Wi-Fi
HotSpot. The feature works best when used in conjunction
with HSPA+ (4G) data services (although 3G service can also
be used).
The Mobile HotSpot connectivity is a wireless version of this
same functionality and allows you to provide Internet
connectivity to multiple devices.
Important! The Mobile HotSpot service can not be active at the
same time as Wi-Fi. Please close your Wi-Fi
connection prior to launching this service.
Note: You must have a tethering plan on your account in order
to use the Mobile HotSpot. You cannot use data on the
device while using Mobile HotSpot.
To activate the Mobile HotSpot service:
1. From the Home screen, tap (Apps) ➔
(Mobile HotSpot).
– or –
From the main Settings page, tap More settings ➔
Tethering and Mobile HotSpot.
2. In a single motion touch and slide the Mobile HotSpot
slider to the right to turn it on.
3. Read the on-screen notification regarding data use and
tap OK.
4. If necessary, tap the Mobile HotSpot field to access the
main application.
5. From the First time HotSpot configuration screen, tap
the Network SSID field and then create a new Network
SSID name.
6. Verify the Security field is set to WPA2 PSK.
7. Enter a new password then write it down.
Connections 228