Samsung SGH-T989ZKBTMB - Manual (Page 288)

Motion Settings
This feature allows you to assign specific functions to certain
phone actions that are detected by both the accelerometer
and gyroscope.
To activate motion:
1. From the main Settings page, tap Motion.
2. In a single motion touch and slide the Motion slider to
the right to turn it on.
Note: If Motion activation is not enabled, all motion services
are greyed-out and disabled.
To activate different motion functions:
� Tap the Motion activation field and activate the desired
on-screen motion option.
• Direct call: Once enabled, the device will dial the currently
displayed on-screen Contact entry as soon as you place the
device to your ear.
• Double tap to top: Once enabled, double tap the top of the
device to be taken to the top of the current on-screen list.
• Tilt to zoom: Once enabled, you must be on a screen where
content can be zoomed. In a single motion, touch and hold two
points on the display then tilt the device back and forth to zoom
in or out.
• Pan to move icon: Once enabled, touch and hold a desired
application shortcut icon or widget on the screen. Once it
detaches, move the device left or right to migrate it to a new
location.
• Pan to browse images: Once enabled, touch and hold a
desired on-screen image to pan around it. Move the device left
or right to pan vertically or up and down to pan horizontally
around the large on-screen image.
• Shake to update: Once enabled, shake your device to rescan
for Bluetooth devices, rescan for Wi-Fi devices, Refresh a Web
page, etc.
• Turn over to mute/pause: Once enabled, mute incoming calls
and any playing sounds by turning the device over display down
on a surface. This is the opposite of the pickup to be notified
gesture.
For more information, refer to “Using Gestures” on page 41.
283