Audiovox VOH560PKG - Manual (Page 15)

Remote Sensor
The VOH560 incorporates an infrared sensor which relays signals from the remote control to allow the
VOH560 and VCP to be controlled simply by pointing its remote control at the remote sensor eye. This
provides control of auxiliary equipment such as an Audiovox DVD. The infrared sensor can reply signals
to auxiliary source that is connecting to monitor din connector #2, such as a DVD player. In this case
you must use the remote control supplied with the DVD player.
Optional Accessories
Wired Headphones
There is one 1/8” headphone jack on the VOH560 that can be used with any standard stereo
headphones. This jack is controlled by the volume up / down buttons on the VOH560 or the remote
control. Remove and save the protective plastic cover to access the jack. Remember to replace the
cover when the jack is not in use.
Remote
Sensor
Eye
Remote
Sensor
Eye
-13-
Wireless Headphones
The VOH560 includes a built in infrared transmitter for use with Audiovox wireless headphones (PN
MVSWHS). Turning the headphone switch on, and wearing them activates the internal micro switch
which will activate the internal IR receiver and the volume can then be adjusted separately with the
controls on each headset. Any number of wireless headphones can be used, but all must be within a
line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line.
See the documentation accompanying your Audiovox wireless headphones.
Infrared
Transmitter
Headphone
Jack