Samsung SPP4231X-XAC - Manual (Page 11)

1 Remove the screws from the back of the PDP.
2 Connect insulation holders to screws (see the illustration below).
• If you are uncertain about installation, hire a specialist to install the wall mount bracket.
• Be sure to check that the insulation holders are completely secured on both the left
and right side after hanging the PDP on the wall mount bracket.
• Be careful to avoid getting your fingers caught during installation.
• Make sure the wall attahcment panels are tightened. Otherwise the PDP may
fall
3 Tighten the screws of the insulation holders to the back of the PDP .
11
Fixing the PDP panel to the wall attachment panel bracket