Samsung SCX-5639FR-XAA - Manual (Page 151)

Regulatory information
151 5. Appendix
FCC Regulations state that changes or modifications to this
equipment not expressly approved by the manufacturer
could void the user’s authority to operate this equipment. In
the event that terminal equipment causes harm to the
telephone network, the telephone company should notify
the customer that service may be stopped. However, where
prior notice is impractical, the company may temporarily
cease service, providing that they:
a promptly notify the customer.
b give the customer an opportunity to correct the
equipment problem.
c inform the customer of the right to bring a complaint to
the Federal Communication Commission pursuant to
procedures set out in FCC Rules and Regulations Subpart E
of Part 68.
You should also know that:
• Your machine is not designed to be connected to a digital PBX
system.
• If you intend to use a computer modem or fax modem on the
same phone line as your machine, you may experience
transmission and reception problems with all the equipment. It is
recommended that no other equipment, except for a regular
telephone, share the line with your machine.
• If your area experiences a high incidence of lightning or power
surges, we recommend that you install surge protectors for both
the power and the telephone lines. Surge protectors can be
purchased from your dealer or telephone and electronic
specialty stores.
• When programming emergency numbers and/or making test
calls to emergency numbers, use a non-emergency number to
advise the emergency service dispatcher of your intentions. The
dispatcher will give you further instructions on how to actually
test the emergency number.
• This machine may not be used on coin service or party lines.
• This machine provides magnetic coupling to hearing aids.
You may safely connect this equipment to the telephone network by
means of a standard modular jack, USOC RJ-11C.
23
Replacing the Fitted Plug (for UK Only)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13
amp plug and has a 13 amp fuse. When you change or examine the
fuse, you must re-fit the correct 13 amp fuse. You then need to
replace the fuse cover. If you have lost the fuse cover, do not use the
plug until you have another fuse cover.