Samsung SGH-T509TSATMB - Manual (Page 121)

Section 8: Changing Your Settings 117
Memory Status
Sect
ion 8
5. Enter a password and press the OK soft key or the
key.
Note: The password is preset to “00000000” at the factory.
To change this password, see "Change password" on
page 116.
FDN mode
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phonebook.
You must enter your PIN2. You can obtain your PIN2 from your
service provider.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Memory Status
You can check the amount of the memory being used and
the memory remaining for Shared memory, Messages,
File manager, Organizer, Phonebook, and Games.