Samsung LNR469DX-XAA - Manual (Page 123)

English- 117
A
P P E N D I X
Installing the Wall Mount Kit (LN-R269D)
Note: This installation is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
How to assemble the Wall Mount Bracket
1 Mark the location on the wall where the hole will be drilled.
Make over 35mm-depth-hole on the marked location using drill.
Fix anchors
on each hole on the wall.
Connect wall-bracket to the wall with wood screws after fitting
anchors into the wall-bracket .
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
2 Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Attach the set-bracket onto the rear side of the TV set and secure the screws .
3 Insert three Hangers of the set-bracket into the grooves of the wall-bracket .
Fix set-bracket and wall-bracket with screws .
Note: Before installing the set on the wall, connect the cables to the set first.
M4 X L20
Wall-Bracket Set-Bracket Screw: 8EA Wood Screw: 4EA Anchor: 4EA Installation Guide
M4 X L12
02 BN68-00910A-03Eng.qxd 10/20/05 3:39 PM Page 117