Samsung SPH-M390ZKABST - Manual (Page 28)

18 2A. Phone Basics
Answering Calls
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press to answer an incoming call. (Depending
on your settings, you may also answer incoming
calls by opening the phone or by pressing any
number key. See “Call Answer Mode” on page 38
for more information.)
Your phone notifies you of incoming calls in the
following ways:
ⅷ The phone rings or vibrates.
ⅷ The backlight illuminates.
ⅷ The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. You may also
see the caller’s phone number, if available.
If you set CALL ANSWER to Talk Key , you also see the
following options. Select one of the following options
from the pop-up screen:
ⅷ SILENT (left softkey) to mute the ringtone.
ⅷ IGNORE (right softkey).
Ending a Call
ᮣ Close the phone or press .
Missed Call Notification
When you do not answer an incoming call, your screen
displays the Missed Call log.
To display the Missed Call entry from the notification
screen:
ᮣ Highlight the entry and press . (To dial the
phone number, press .)
To display a Missed Call entry from standby mode:
1. Press > Missed Alerts .
Note: Use this feature to navigate through automated menus.
If you know the number sequence required to connect
you to the right destination and the menu prompts
require more time to accept your number choice, enter
a
2-Sec Pause between each number. A 2-Sec
Pause entry displays a “t”.
Example: (214) 555-7777t5t6t7
Boost SPH-M390.book Page 18 Friday, August 31, 2012 6:30 PM