Samsung LP08CPLSS-XAZ - Manual (Page 12)

To Close Frame Manager application -
Click on Exit menu item.
Update Firmware
To update the firmware from PC through USB cable, please ensure the following :
SAMSUNG Digital Photo Frame must be connected with PC using USB cable
Device Mode must be connected as MINIMO or MASS STORAGE
Do not disconnect USB cable during UPDATE operation
Do not operate or switch of Digital Photo Frame Device during UPDATE operation
Remove SD/MMC or CF card, USB stick, if inserted into device before running UPDATE.
All the files required for the update must be available on the PC
Browse to the folder containing these files after PROCEED
- Click Right Mouse Button on the Frame Manager Tray Icon.
1. Following tray menu will appear.
2. Click on Update item.
3. Following instruction dialog will appear.
4. If you do not want to update firmware click, click on Cancel button.
5. If you want to update firmware, click on Proceed button.
6. Following dialog will appear.
7. Select the path where the new firmware is available on disk/PC.
8. Select the file and click Open button.