Samsung SGH-T199ZKWTMB - Manual (Page 50)

• Phone sounds: Highlight a setting and press
(Edit) to make a selection.
– Keypad tone: Play a tone when the keypad is
pressed. Select On or Off.
– Power on type: Choose a type of sound for the
phone to play when powering on, from Melody,
Vibration, Vibration and melody, or Mute.
– Phone sound volume: Choose a volume level
between 0 and 7 for phone sounds.
3. After making selections, press
(Options) ➔ Save or press
(Back), then
press (Yes) to confirm your settings.
Silent
When set to Silent profile, your phone makes no
sounds.
� From the Idle screen, press
(Menu) ➔
Settings ➔ Personalize ➔ Sound profiles
➔ Silent.
Note: There are no settings to customize for the
Silent profile.
Vibration
When set to Vibration profile, your phone vibrates
to alert you to incoming calls and messages.
1. From the Idle screen, press (Menu) ➔
Settings ➔ Personalize ➔ Sound profiles
➔ Vibration.
2. To customize the Vibration profile settings,
highlight Vibration and press (Options)
➔ Edit. Press the Navigation key right to
select the New messages tab.
• New messages: Highlight a setting and press
(Change) to change the selection.
– Message alert repetition: Choose an interval
for repeating alerts for new messages, from
Once, Every 1 minute, or Every 2 minutes.
Note: There is only one setting available for
customization within the Vibration profile.
Tip: Quickly activate the Vibration profile from the
Idle screen by pressing and holding the
key until the “Vibration Profile on” message
and the Vibration profile icon displays.
To return to the previous sound profile, press
and hold the
key until the phone returns
to the previous profile and the icon
disappears.
46