Samsung SGH-A187ZBCATT - Manual (Page 59)

Changing Your Settings 55
Set FDN Mode
FDN (Fixed Dialing Number) mode, if supported by your SIM card,
restricts your outgoing calls to a limited set of phone numbers
that are stored in the SIM FDN list. When this feature is enabled,
you can make calls only to phone numbers stored in the FDN list
on the SIM card.
1. Highlight On or Off and press the Select soft key or
the key to assign the new setting.
2. Enter your PIN2 password and press the OK soft key or
the key.
Note: Your PIN2 is provided by your service provider.
Change Phone Password
The Change Phone Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one. Once you
have entered a new password, you are asked to confirm it by
entering it again.
Change PIN Code
This feature allows you to change your current PIN code,
provided that the PIN Check feature is enabled (see “Check PIN
Code” on page 54). You must enter the current PIN before you
can specify a new one.
Once you have entered a new PIN, you are asked to confirm it by
entering it again.
Change PIN2 Code
The Change PIN2 Code feature allows you to change your current
PIN2 to a new one. You must enter the current PIN2 before you
can specify a new one. Once you have entered a new PIN2, you
are asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
item does not display.
Reset Phone
The Reset Phone option allows you reset your phone to its
default settings.
1. In Idle mode, press Menu ➔ Settings ➔ Phone ➔
Reset Phone.
You receive the prompt, “All settings reset to factory
defaults. Continue?”.
2. Press the OK soft key to reset your phone or press the Back
soft key to cancel.
a187.book Page 55 Friday, August 13, 2010 9:51 AM