Samsung SC-D353-AFS - Manual (Page 112)

ENGLISH
112 112
Maintenance
✤ At the end of a recording you must remove the power source.
✤ When recording with a Lithium ion Battery pack, leaving the pack
on the Camcorder can reduce the life span of the
battery. The Battery pack should be release after
recording is completed.
1. Slide the TAPE EJECT switch in the direction of the
arrow.
■ Opening the cassette door ejects the tape
automatically.
■ Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store
the Camcorder in a dust free environment.
Dust and other foreign materials can cause square-
shaped noise or jerky images.
3. Set the Power switch to the Off.
4. Disconnect the power source or remove the lithium
ion Battery pack.
Press the BATTERY RELEASE button located on
the bottom of the Camcorder and slide the Battery
pack in the direction of the arrow.
After Finishing a Recording
✤
✤ , ,
1. TAPE EJECT
■
■
,
2. , ,
3.
4.
BATTERY RELEASE ,
1
4
2
3