Samsung SCH-I770HAAVZW - Manual (Page 162)

159
12. Tap to save your changes and return to the previous screen.
Note: Smart pairing mode allows you to easily make a connection with your hands-free or stereo headset.
Accepting a Bond
To accept an incoming bond, follow these steps:
1. Make sure that Bluetooth is turned on and the device is discoverable.
2. When prompted to bond with the another device, tap the Yes soft key.
3. Enter the numeric passcode/passkey and press the Next soft key. You are
then notified the pairing is in progress.
4. Use either your virtual QWERTY keyboard or keypad to enter a new Device
Name for the external Bluetooth device and tap the desired services
available to that same device.
5. Tap the Finish soft key to complete the process.
Renaming a Bond
The name of each bond can be changed, if necessary, by following these steps:
1. Make sure that the two devices are within range and that Bluetooth is
discoverable on both devices.
2. Tap Settings . By default, the Personal tab is highlighted.
3. Tap the Connections tab.
4. Tap Bluetooth and then select the Devices tab.
5. Tap the bond you want to rename.
6. In the Display Name field, enter a new name for the bond.
7. Tap the Save soft key to save your changes and return to the previous
screen.
Bluetooth Hands-Free Device
You can use a Bluetooth Hands-free device with your Saga™.
1. Create bond between your Saga™ and the Bluetooth Hands-free device.
For more information, refer to "Creating Bluetooth Bonds" on page 158.
ok