Audiovox GMRSWP1 - Manual (Page 11)

128-6739
11 of 16
-11-
Using the Monitor (MON) Button
To listen to channel activity with the squelch bypassed:
1. With the radio in the GMRS/FRS standby mode, momentarily press
the MON button; the radio will enter the monitor receive mode as
indicated by the background noise.
2. To exit the monitor mode, momentarily press the MON button again; the
radio will return to the GMRS/FRS standby mode.
FM Radio Selection
To access the FM mode:
1. With the radio in the GMRS/FRS standby mode, press and hold the
MON button; the FM radio (Fr) indication appears on the display for 5
seconds and then returns to the GMRS/FRS channel number display.
NOTE: Even though the FM radio mode is active, you can still transmit
and receive the GMRS/FRS signal. To inhibit the GMRS/FRS
receive signal mode, press and hold the Channel (CH) button; FR
appears on the display. To exit this function, press and hold the
CH button again.
2. Now press the Channel (CH) button once; Searching (SE) appears on
the display, indicating the radio is searching for a strong FM station.
3. When a station is located, it will be heard in the headset; the display will
then automatically revert to the GMRS/FRS channel number.
NOTE: If no FM station is acquired after several seconds, repeat step 2
to initiate another FM station search.
4. To exit the FM mode, press and hold the MON button for at least 2
seconds;and the radio will revert to the GMRS/FRS standby mode.