Samsung SPH-A790ZKSXAR - Manual (Page 116)

Section 2I: Using Voice Recognition 107
ⅷ Voice commands for checking phone status - With a single
command, you can have the phone play back and display its
phone number, the current signal strength, network coverage,
battery level, or all of the above.
For example:
Ⅲ “Check Battery”: Instructs the phone to report its current
battery strength.
Ⅲ “Check Status”: Instructs the phone to report all status
information.
Activating Voice Recognition
Voice recognition allows you to say commands to perform common
functions supported by your phone. There is no voice training
required to use the voice recognition feature. You simply say the
pre-designated command displayed on your screen in a normal tone
of voice to perform the desired function.
To activate voice recognition:
1. Press and hold . (The phone prompts you to say a
voice command.)
2. Wait for the beep and then say one of the following commands:
Ⅲ
Call <Name or #>
Ⅲ
Send Text <Name>
Ⅲ
Lookup <Name>
Ⅲ Go To <App>
Ⅲ
Check <Item>
When it recognizes one of these commands, the phone launches the
associated application. If the phone does not hear a command
within approximately eight seconds, it de-activates voice
recognition without taking any action.